Kopad, tarvikud

Sibo 50915C20004

Properties: The bushings have a hardness depth of 0.8–1.0 mm, with hardness of HRC 58-62 Surface-hardened bolts with a tolerance of H7 are recommended in order for these bushings to work well The bush housings should have a tolerance of H7 (maximum H8) Technical info: Steel bushing with grease groove Ring lubrication groove on inside and outside, outward-pumping spiral lubrication groove on inside

50915C30014

A (mm): 30 C (mm): 50 D (mm): 55 E (mm): 12 F (mm): 30

GLT/LHG POZ3520, 5018514, AL5018514 Material: Steel, POM Min working temperature: -40 °C Max working temperature: 130 °C Radial load dynamic: 140 N/mm² Radial load static: 250 N/mm² Max. shaft speed: 2.5 m/s

Sibo

Sibo

Sibo

Sibo